Asante-technologies 10NIC-PCITM Manual do Utilizador descarregar pdf (Página 11)

Page 2-3

Connecting the Adapter to the Network

If your computer uses a screw to hold the adapter in place,

re-insert and tighten the screw.

Figure 2-1 Installing the adapter

Replace the computer’s cover.

not

start the computer until you connect the Asanté

10NIC-PCI adapter to the network, as described in the next

section, “Connecting the Adapter to the Network.”

Connecting the Adapter to the Network

The Asanté 10NIC-PCI adapter provides an RJ-45, 10BaseT port for your net-

work.

▲

Important!

Connection to a 10BASE-T hub or switch

for 10Mbps operation requires a Category 3, 4, or 5

UTP (untwisted pair) cable or twisted pair cable.

Connecting a Network Cable

To connect your Asanté 10NIC-PCI adapter to the network:

Plug the RJ45 connector on one end of your network cable

into the Asanté 10NIC-PCI adapter’s RJ-45 port.

Plug the other end of your network cable into the network

hub or switch, or into a wall socket connected to a net-

work hub or switch.

Reconnect your computer’s power plug.

Push the adapter

firmly into the slot

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 49 50

Sem comentários

Asante-technologies 10NIC-PCITM Manual do Utilizador Página 11